This double real estate sign post comes with 2 full length, 1-piece vertical posts. Powder coated in various colors. Includes aluminum caps on the post and arm powder coated to match the post. Also Includes 2 steel stakes and all required hardware to hang your sign.
Hardware included: 2 steel ground stakes, 2 eyebolts, 2 safety pin clips, 2 sign rider clips with screws, arm with caps, two 1-piece posts with cap.
Sign Fastener locations. spaced 16 inches or 19 inches apart on center.
***Please note, this is a non-stock product. Please allow additional time for fabrication.
- Posts: various heights x 2 3/4 inches x 2 1/4 inches (1-piece post)
- Cross Arm: various lengths x 2 3/4 inches x 2 1/4 inches
- Stakes: 32 inches long – 1 1/2 inch steel angle iron
- 72″x5″x6″ box, 25 lbs.
Custom post and arm lengths available upon request. Customization will add time to order processing.
Assemby and Installation instructions
CAUTION: HAVE ALL UNDERGROUND UTILITIES MARKED BEFORE INSTALLATION
1. Pound one stake into the ground to a sufficient depth (a small sledge hammer is ideal).
2. Slide one post over the stake, attach the arm, attach the other post to get the location of the second stake.
3. Pound the second stake into the ground and slide the assembled unit over both stakes.
4. Screw the eye bolts into the threaded grommets to the desired depth. Attach your sign to the eye bolts with the safety pin clips. attach the optional rider clips to the top of the arm as desired.