Product Description
You are only limited by your imagination when it comes to these real estate sign frames. There is no top bar so your sign can spill over into any shape you want. We custom make these frames to match the dimensions of your signs. They are available with ground stakes, frame feet, or both options. Powder coated and available in different colors. Please allow some time for fabrication. These frames bolt together and ship unassembled.
These frames are designed to be used with 3 mm aluminum composite material (AKA Dibond, ACM, Aluminum sandwich board). The frames will work with 4 mm coroplast, however we don’t recommend coroplast for outdoor use as it is quite flexible and a strong wind gust could separate the coroplast sign from the frame.
Things to think about when designing your signs.
- Many sign printers will contour cut the signs from a full 4×8 ft sheet of substrate. Ideally you should design your sign so that you can fit as many signs on one sheet as possible. That will allow for the best possible pricing and little waste. In many instances you will be able to fit your sign riders on the same sheet and also have different artwork and colors for each sign (see example below).
- Most signs are cut out with a CNC router and the the tooling requires about 1/2″ margin between your signs. We recommend making your signs 1/2 smaller in length and width as you will be able to fit more signs onto one sheet of substrate.
- Don’t place important artwork or text within 1 inch of the edges of the sign that insert into the frame.
